Scotts EvenGreen Drop Spreader | Love The Garden
 

Frequently Asked Questions

Frequently Asked Questions

Scotts EvenGreen Drop Spreader

Q1. What setting do I use?
A1. You can find most spreader settings here: http://www.lovethegarden.com/advice/lawn-care/tools/lawn-spreader-settings. If you can’t find the required setting then please contact them directly at [email protected] or on 01276 401300
Q2. What speed do I need to walk when using the spreader?
A2. The recommended walking speed is approximately 8.3m in 10 seconds.
Q3. How do I calibrate the spreader?
A3. New EvenGreen Spreaders are calibrated at the factory; however, if you require calibration instructions please contact The Scotts Company at [email protected] or on 01276 401300
Q4. How do I maintain the spreader?
A4. After each use, pour any left over product into the original packaging and wash the spreader thoroughly over the lawn to remove all product clinging to the spreader, particularly around the axle. Hot water may be required to remove stubborn residues. Allow the spreader to dry before safe storage. Lubricate the axle bushings regularly using a light spray lubricant. Do not use heavy oils or grease as they can attract debris, which can cause premature wear. For winter maintenance instructions, please contact The Scotts Company at [email protected] or on 01276 401300 for further advice.