Scotts® EvenGreen™ Drop Spreader

UK_016057_SCO_PS_1.png

Scotts® EvenGreen™ Drop Spreader

Main product features
Refillable
Refillable

The Scotts® EvenGreen™ Drop Spreader has variable settings to apply lawn food or grass. seed. For best results use with Miracle-Gro® EverGreen® granular lawn treatments and/or grass seed products only.

Pack Sizes
1 unit
When to use
J
F
M
A
M
J
J
A
S
O
N
D

HOW TO USE

The Scotts® EvenGreen™ Drop Spreader is easy and quick to use. There’s an on/off grip handle so starting and stopping the application of the granules is easy and accurate when you get to the end of a strip.

Simply adjust the application setting according to the product you are using. All Scotts Lawn Builder and EverGreen bags carry the setting number for accurate application and best results. Walk up and down the lawn, The Scotts EvenGreen Drop Spreader creates a strip of granules directly below the moving spreader which is approximately 45cm (18in) wide. When returning, align the arrow on the hopper above the tyre marks made in the previous strip.

 

WHEN TO APPLY

With variable settings for quick and accurate application of lawn care granules, lawn sand and grass seed. Best choice for even results, especially when applying weed or moss control treatments.

Always read the label and product information before use.

What setting do I use?

If you  need helping understanding what spreader settings to use you can contact us at  consumerenquiries@evergreengarden.com or  by phoning  01276 401300.

 

What speed do I need to walk when using the spreader?

The recommended walking speed is approximately 8.3m in 10 seconds.

 

How do I calibrate the spreader?

New EvenGreen Spreaders are calibrated at the factory; however, if you require calibration instructions please contact us consumerenquiries@evergreengarden.com or by phoning 01276 401300.

 

How do I maintain the spreader?

After each use, pour any left over product into the original packaging and wash the spreader thoroughly over the lawn to remove all product clinging to the spreader, particularly around the axle. Hot water may be required to remove stubborn residues. Allow the spreader to dry before safe storage. Lubricate the axle bushings regularly using a light spray lubricant. Do not use heavy oils or grease as they can attract debris, which can cause premature wear. For winter maintenance instructions, contact consumerenquiries@evergreengarden.comor phone us on 01276 401300 for further advice.

Health and Safety

Always read the pack label and product instructions carefully before use. For further information relating to product safety please review the product data safety sheet link below.

Store locator